powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this section. Powered Industrial Truck Training. The Occupational Safety and Health Administration (OSHA) revised this standard in an effort to “reduce the number of injuries and deaths that occur as a result of inadequate operator training.” Operators mustLif assure the load does not exceed rated weight limits. Powered Industrial Trucks – Forklift Operator Training – English The Occupational Safety and Health Act of 1970 includes a provision that states, “only trained and authorized operators will be permitted to operate a powered industrial truck.” Wheels shall be blocked if the truck is parked on an incline. Lift Code 5: Counterbalanced Rider, Cushion Tires, Sit Down.
Industrial Truck Association.
2. The Occupational Safety and Health Administration (OSHA) revised this standard in an effort to “reduce the number of injuries and deaths that occur as a result of inadequate operator training.” Non-combustible agents should be used for cleaning trucks. t capacity must be marked on all powered industrial trucks. (1) The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this section. Powered Industrial Trucks Forklifts Purpose On March 1, 1999 the revised Powered Industrial Truck Standard, 29 CFR 1910.178, went into effect. 2. The following are examples of Class I powered industrial trucks. Lift Code 6: Counterbalanced Rider, Pneumatic or Either Type Tire, Sit Down. c) Roll Over Protective Structure. Do not park on a grade, unless wheels are blocked. Whenever making a 90 turn, remember that:
When a powered industrial truck is left unattended, load engaging means shall be fully lowered, controls shall be neutralized, power shall be shut off, and brakes set. Powered Industrial Truck Operator Safety Training Test MULTIPLE CHOICE: Circle the letter of the best answer. (a) Safe Operation. Lift Code 1: Counterbalanced Rider Type, Stand Up. b) Removable Overhead Protection Structure. • Hard hats will be worn by Powered Industrial Truck (Forklift) Operators in high lift areas. Lift, carry, stack – and comply. [29 CFR 1910.178(m)(5)(i)] Select a hard, level surface. Here's why. Make sure workers know that: On grades greater than 10 percent, loaded powered industrial trucks must be driven with the load upgrade, except for motorized hand and hand/rider trucks, which should be operated on all grades with the load downgrade. The term ROPS refers to? • Powered Industrial Trucks (Forklifts) will travel no faster than 5 mph or faster than a normal walk.